Heavy Duty non-slip floor marking adhesive tape
The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Heavy Duty non-slip floor marking adhesive tape
Retro-reflective tape (cat's eye effect) with R11 slip-resistance according to DIN 51130.
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Self-adhesive
- Extremely wear-resistant
- Quick to apply
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
Notice
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Application area
Non-slip floor marking for indoor and outdoor rough and uneven surfaces such as stairs and ramp edges, warehouse/logistics, work areas, lifting platforms, workshop pits, wet areas.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!