tam katalog Malzeme işleme Frezeleme Metal frezesi

End mill for hard machining

Ürünler
Hizmetler ve Bilgiler

36 sürümlü 4 ürün bulundu

Metal freze,karbür,SPEEDCUT Ultra HRC ekstra uzun

Especially suited to machining hardened and high-strength steels. High rigidity allows for high feed rates and long service life, high helix angle produces an excellent surface finish on the workpiece. The end mill is used for peripheral milling (finishing). At shallow depths, front cutting is also possible by reducing the feed rate by 50 %.

9 Ürün

Sürümlere git

Met.freze,karbür,SPEEDCUT UltraHRC ekstra uzun L2

Especially suited to machining hardened and high-strength steels. High rigidity allows for high feed rates and long service life, high angle of twist produces an excellent surface finish on the workpiece. The cutter is used for circumferential milling (finishing). At shallow depths, front cutting is also possible by reducing the feed rate by 50%.

2 Ürün

Sürümlere git

Metal freze,karbür,SPEEDCUT Ultra HRC DIN 6527L

9 Ürün

Sürümlere git

Metal freze, karbür, WN K Z6-10 H tipi TIALN-S

Especially suited to machining hardened and high-strength steels. High degree of stiffness allows for high feed rates and long service life, high helix angle produces an excellent surface finish on the workpiece. The milling cutter is used for circumferential milling (finishing). At shallow depths, front cutting is also possible by reducing the feed rate by 50 %.

16 Ürün

Sürümlere git

Üzgünüz, aramanızla eşleşen bir şey bulamadık.

Lütfen bunu kontrol edin ya da farklı bir arama terimi kullanın.