sens.it RS3 sensor for tyre pressure monitoring system
Tyre press cont sys Alligator-sens rit RS3 alu var
SENSO-UNI-TYRPRES-433MHZ-SENS.IT-RS3
Register now and access more than 125,000 products
Reduced purchase cost and optimised storage
Patented ball joint design
Can be used in almost all steel and aluminium wheels
Electronic detection (ID) of an original sensor can be copied to the sens.it sensor in conjunction with iQ 50
- No need for repeated teach-in on the vehicle in the case of complete wheels (winter tyre set)
- Enormous time saver
Sensor can be programmed as often as required
- Highly flexible
- Remote programming thanks to wheels that are already fitted using iQ 50, enabling a "neutral" preparation of complete wheels
Sensor supplied without valve. For each tyre change, replace the valve and adhere to the manufacturer's specified tightening torques. Works with the programming and diagnostics tool iQ50 from WOW!
Datasheets(X)
Use on vehicle class M1 (cars) with direct tyre pressure monitoring system
Material of valve | 0 - not applicable |
Min. valve angle | 12 Degree |
Max. valve angle | 40 Degree |
Transmission frequency | 433.92 MHz |
Max. speed | 250 km/h |
Tightening torque – union nut according to manufacturer's specifications incl. tolerance | 3.3 Nm |
Tightening torque – screw according to manufacturer's specifications incl. tolerance | 3.3 Nm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!