Welcome to Würth Industry For trade customers only
Zinc cleaner - METCLNR-ZINK-1LTR

Zinc cleaner

Zinc cleaner
METCLNR-ZINK-1LTR

Art.-no. 0893460100
EAN 4047376598577
All versions

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Ammoniacal wetting agent cleaner for galvanised surfaces

Particularly for cleaning and degreasing fresh galvanised surfaces


  • Prevents adhesion problems

  • Paint adheres even better thanks to top coat activation


Wide range of uses, suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces

Notice

For coating galvanised surfaces, only use tempering materials specially recommended for galvanised surfaces. Alkyd resin-based coating materials are generally unsuitable.


Würth zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces. Galvanised and freshly galvanised surfaces.

Instructions

Mix 1:1 with water. Spray galvanised surfaces and wet-sand with sanding fleece. Allow the resulting metallic grey suspension to soak in for 10 minutes and then sand again. Then wash off thoroughly with water.

Contents

1 l

Container

Round bottle

Smell/fragrance

Characteristic

Colour

Transparent

Chemical basis

Ammoniacal surfactant

Shelf life from production

36 Month

Density/conditions

0.999 g/cm³ / at 20°C

AOX-free

Yes

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Nylon abrasive Fine A
Nylon abrasive Fine A

SNDFLC-ROLL-5M-A180-35

Pre-treatment for painting galvanised steel
x 1 pcs
Nylon abrasive Ultra-Fine S
Nylon abrasive Ultra-Fine S

SNDFLC-ROLL-5M-S1000-35

Highly flexible nylon hand sanding fleece for cleaning surfaces (derusting) and matting new parts, old paint and aluminium. For optimum use in critical areas like folds, corners, recesses or other sharp corners and edges and on interior body parts
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Household glove
Household glove
Description:
Permeation level: 6
Liquid-proof, premium-quality cleaning glove made from natural latex
Vinyl chemical and moisture protective glove
Vinyl chemical and moisture protective glove
Description:
Permeation level: 6
Fully dipped protective glove with vinyl coating on cotton jersey lining
Chemical protective glove made from chloroprene and latex
Chemical protective glove made from chloroprene and latex
Description:
Permeation level: 6
Cotton flocking on the inside
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Chemical protective glove made from natural latex and chloroprene
Chemical protective glove made from natural latex and chloroprene
Description:
Permeation level: 6
Cotton flocking on the inside
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details