Wheel hub and drive shaft removal tool set 75 pieces, for vans and light trucks

• Considerable time savings, no damage to the thread, wheel bearing not damaged during removal of the drive shaft


• Optimised hole pitch for maximum coverage of models within the market


• Flange with 2, 3, 4, 5 and 6 hole bolt pitch for large passenger car and van wheel hubs


• Can be used with Govoni mechadraulics or hollow piston cylinders in the case of extreme power requirements up to max. 17 tonnes.

Scope of delivery:

• 1 x pulling flange with thread reducing adapter 2-3/4 inch x 16 UN to 1-1/2 inch x 16 UN, work area Ø 110 to 186 mm


• 1 x thread reducing adapter 1-1/2 inch x 16 UN to M22x2.0 for mechanical spindle


• 1 x mechanical pressure spindle with ball tip, M22x2.0 x L = 250 mm


• 1 x high-performance spindle grease


• 6 x draw bolt set (each consisting of three individual part types) for wheel nut and wheel bolt systems (M12 x 1.25/M12 x 1.50/M14 x 1.50/M14 x 2.00/M16 x 1.50/M18 x 1.50)