WÜPLAST® pan head screw with flange
WÜPLAST W1411 steel 10.9 plain pan washer head Z
SCR-FLG-W1411-Z1-10.9-3X10
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 10 mm |
Material | Steel |
Property class | 10.9 |
Surface | Plain |
Internal drive | Z1 |
Thread type | Plastic screw thread |
Pitch | 1.34 mm |