WOOD CONNECTOR WC-DT-D
Wood connector WC-DT-D
WOCON-(WC-DT-D)-150X68X25
Register now and access more than 125,000 products
- Increased load capacity thanks to precisely fitting doubling of the WOOD CONNECTOR WC-DT
- High level of factory pre-fabrication via simple CAD planning and machine trimming
- The doubled WOOD CONNECTOR WC-DT is secured quickly and easily using two ASSY 4 PII CSMP screws of 8 mm diameter and 110, 130 or 150 mm length
- Proper assembly and correct connector alignment are ensured as the connector is inserted into pre-drilled holes of differing sizes
- No capital investment thanks to the use of standard milling cutters
- Manufactured from laminated beech veneer to conserve resources
- Moisture resistant thanks to high-quality glue and surface protection
- CAD models are available for download from various providers of CAD trimming software or from the Würth CAD database
- Connectors which are not installed should be stored in a dry place to prevent dimensional change due to moisture intake
Datasheets(X)
- Structural connector for quick assembly of large pre-fabricated wall, ceiling and roof elements made of solid wood or CLT with larger wood cross-sections
- For reinforcing the WC-DT wood connector (load capacity increase)
- Usage class 1 and 2
The WC-DT-D (dovetail) wood connector is a tapered, wedge-shaped connector. It is inserted into pin holes of different sizes and screwed in place with two ASSY 4 PII CSMP screws of 8 mm diameter. The WC-DT-D connector and hook-in pockets are positioned during the CAD planning of the elements. Once mounted on the timber elements, the WC-DT-D wood connector is hooked into the tapered pocket located on the connecting component. As the timber structure is lowered, the two timber elements become connected as the WC-DT-D wood connector is wedged into the milled pocket.
Material | Multiplex beech |
Length x width x height | 150 x 68 x 25 mm |
Min. beam cross-section of subcarrier (B/H) | 0 x 0 cm |
Diameter of hole | 8 mm |
Required minimum number of locking screws | 2 PCS |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!