Valley/ridge clip for head rebate clay bricks
Ridge/arris clip for roof tiles
RIDGCLIP-F.HEADREBOTEBRICK
Art.-no.
0681420110
EAN 4045727602607
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Universal stainless steel retaining clip for quick installation of cut pantiles in hip and valley areas
Stainless steel retaining clip (material 1.4310) with integrated stainless steel wire
Clips are easily clipped or hammered on for efficient use
Eliminates complex, time-consuming and material-intensive drilling
Equipped with 500 mm stainless-steel binding wire
Notice
Due to the many different roof tile models and different rebate designs, always check the suitability of the retaining clip for the individual tile type using a sample.
Product information
Datasheets(X)
Application area
For rapid attachment of cut pantiles in valley and hip areas, on dormers and around skylights
Instructions
- Fit cut tiles as closely as possible to the roof valley or hip so that the clip is completely covered by the roll ridge and the ridge tile.
- Position valley/hip clip at an angle, push completely onto the cut roof tile and check the clip is securely seated.
- Attach binding wire to substructure under slight tension using a fastener (screw or nail) that is at least corrosion-protected
Material | Stainless steel A2, 1.4310 |