Upgrade set for the Original Prusa XL
Tool head upgrade 1 to 5 tool heads Prusa XL
SP-UPGRADE-PRUSA-XL-1TO5TOOLHEADS
Art.-no. 4954628341
EAN 4068362346644
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
A practical upgrade set to upgrade the Original Prusa XL 3D printer from one tool head to five tool heads
Scope of delivery
XL Single-Tool Nextruder upgrade from one tool head to five tool heads
- 1x XL Single-Tool Nextruder upgrade
Including 0.4 mm nozzle (for the existing Nextruder)
- 4x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
Including spool holder and Prusa Nextruder sock
- 1x XL electronic expansion set
- XL splitter board
- Additional power supply
- 2x additional 0.4 mm nozzles
Product information
Datasheets(X)
Instructions
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
Needle-nose pliers - T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Manufacturers | Prusa |