Welcome to Würth Industry For trade customers only

Universal glue

Universal paste
WLPAPADH-SOLVFRE-UNI-800G

Art.-no. 0893000130
EAN 4052703360307
Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Secure adhesive strength for wallpapering devices, airless devices, brush application and wall adhesive technology
  • Very strong adhesive strength with high degree of initial adhesion

  • Optimum glue distribution

  • Easy to correct

  • Secure adhesion to edges

  • Very high degree of resistance to moisture

  • Excellent machine suitability

  • Extra-transparent when drying

  • Resistant to lime and cement

  • Secure adhesive strength for virtually all carpets and wall coverings

  • Universal use for all types of application
Notice

Store in a cool and dry place.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Secure adhesion for virtually all kinds of wallpapers and wall coverings, e.g. all ingrain wallpaper textures, embossed non-woven wallpapers, textured and embossed wallpapers; vinyl and textile wallpapers, ingrain non-woven wallpapers, lining paper, reinforcing fleece and woven glass fabric (laminated or non-laminated). Also suitable for use on difficult surfaces such as freshly plastered surfaces, surfaces with old plaster and gypsum plasterboard.

Instructions

Surface pre-treatment:


The surface must be dry, load-bearing and free from release agents (formwork release oil, grease, dust etc.). Remove old wallpapers, poorly adhering coats of paint or distempers using Würth wallpaper stripper, art. no. 0893 000 130. Patch up cracks, holes and uneven areas using the Würth joint and surface filler (art. no. 0892 600 15/0892 600 18). Harden sandy and chalky surfaces with primer. Pre-paste or prime highly absorbent surfaces.



Application:


Quickly add the universal glue to cold, clear water (see table) while stirring the water vigorously and continue stirring for a short time. Stir well again after 2 to 3 minutes. Stir vigorously again after 15 minutes. Apply an even layer of glue and in the specified thickness on the back of the wallpaper using a wallpapering device or a brush, and paste the wallpaper to the wall as specified by the manufacturer. Dimensionally stable wall coverings that do not require any soaking time are also suitable for wallpaper pasting. Apply the glue to the surface in a width to match the wallpaper width using a spraying device or a short-pile lambswool roller. Place the wall covering directly on the pasted wall and press on evenly using a roller (cellular rubber roller) or a wallpaper brush. Moisten the back of laminated wall coverings with a wet sponge before bonding them. The application notes from the wallpaper manufacturers must be observed. Wash off glue residues with clear water and finish by wiping with a dry cloth. Clean all equipment with water immediately after use. Do not use in rooms or on objects colder than +5°C.



  • Pre-pasting: Coating 1:20, 16 l water per 800 g pack, 800 g pack is sufficient for approx. 95 m²

  • Wallpapering device/brush application: Coating 1:15, 12 l water per 800 g pack, 800 g pack is sufficient for approx. 65 m²

  • Roller/spraying device: Coating 1:12.5, 10 l water per 800 g pack, 800 g pack is sufficient for approx. 45 m²

Chemical basis

Methyl cellulose, additive, synthetic resin powder

Colour

White

Min. processing temperature

5 °C

Paste swelling time

15 min

Conditions for paste swelling time

at 20°C and 50% humidity

Density

0.43 g/cm³

pH value

8

Weight of content

800 g

Application quantity in volume/area

200 ml/m²

Shelf life from production

24 Month

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Wallpaper smoothing brush With a mixture of China and polyester bristles

WLPAPBRSH-CHG-300X105MM

x 1 pcs
Wallpaper smoothing brush with 3 rows of bristles

WLPAPBRSH-300X105MM

High-quality wallpaper smoothing brush with 3 rows of bristles made of different materials
x 1 pcs
Wallpaper stripper concentrate

WLPAPSOLVR-SOLVENTFREE-1L

For the effortless removal of all kinds of wallpapering
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information