Textured, powder-coated sheet steel print sheet for Prusa XL series

Overview

• Heatbed with embedded magnets that can withstand high temperatures


• These magnets hold the removable spring steel sheets in place


• Powder-coated metal makes it very difficult to damage the print sheet


• If a hot nozzle comes into contact with the metal, it can dissipate the heat


• Powder coating also gives the surface a distinct textured look that will be visible on your prints


• The textured surface hides most mechanical damage caused by tools


• Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model

Advantages

• Scratch resistant, difficult to damage


• Transfers texture to prints


• Prints detach automatically once the sheet cools


• Glue stick not required for PETG

Disadvantages

• PLA prints with a small contact area may require a brim


• PLA prints with a large footprint may warp


• Never clean using acetone

Consumables such as PEI sheets (smooth, textured etc.) are not covered by the warranty as the coatings are designed to diminish over time. The warranty still applies in the case of failure due to material or manufacturing faults. Cosmetic damage including but not limited to scratches, dents, cracks and other cosmetic faults are also not covered by the warranty. Only sheets that are defective on arrival are covered by the warranty.