Regisztrált ügyfélként az online áruház összes funkcióját használhatja, a rendelési funkciót is beleértve.
Értékesítés csak vállalkozások részére.
A QR-kód már nem érvényes. Kérjük, kattintson a következő gombra az újbóli aktiváláshoz.
Rendezés
16 elem található a(z) 159 verziókkal
Recommended for cutting soft to hard, long-chipping materials such as aluminium and copper alloys and thermoplastics.
Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.
Universal cutter with dynamic special diamond pattern profile for rough machining. Produced from new SPM substrate with very high cobalt proportion. Combining the hardness of solid carbide with the toughness of PM steel. This cutter is ideal for meeting the highest requirements in terms of cutting performance and increasing cutting volume.
Produced from new SPM substrate with very high cobalt proportion. Combining the hardness of solid carbide with the toughness of PM steel. This cutter is ideal for meeting the highest requirements in terms of cutting performance and increasing cutting volume in stainless steels.
Wide range of applications on medium to high-strength materials (approx. 900-1400 N/mm²), e.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.
Made from powder metallurgical material for use in extreme machining conditions and/or for a long tool life. Wide range of applications on medium to high-strength materials (approx. 900-1400 N/mm²), e.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.
Wide range of applications for materials of medium to high strength (approx. 900-1400 N/mm²). E.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.
Recommended for milling hard-to-machine, high-strength materials up to 1300 N/mm² and for titanium and titanium alloys.
Recommended for milling soft to hard, long-chipping materials such as aluminium and copper alloys and thermoplastics.
Vannak további találatok is a kereséshez. Ha pontosabb eredményt szeretne, pontosítsa a megadott adatokat.
Kérjük, ellenőrizze a beírt adatot, vagy használjon másik keresőszót.
Ball-nose end mill
Csiszoló maró
HSS szármaró
Homlokmaró
Hosszlyukmaró
Résmaró
Szögmaró
Tárcsamaró
