3D plastic printing FFF spare part

The original print core CC with a nozzle diameter of 0.4 mm is a replaceable print core specially developed for the UltiMaker 3/S3/S5 and S7 for the use of abrasive materials.

This print core assembly is an original UltiMaker spare part and can be used in various UltiMaker models. Print cores are not included in the scope of delivery and must be ordered separately if required.

The original print core AA is a replaceable print head that has been specifically developed for Ultimaker printers series 3 and above. AA cores feature a specially developed internal geometry that is suitable for all standard filaments, though not for PVA or abrasive filaments. PVA in this extruder will result in irreparable blockages and should be printed using the BB core specifically designed for this purpose. The CC core is available for abrasive materials.

Wear-resistant CFRP surface with 1 mm thickness for temperatures up to 130 °C. For easy adhesion using 3M transfer tape. Alternative print bed area 330 mm x 330 mm for the Raise3D Pro2/Pro2 +. Designed for Fiberthree polyamides with high adhesion to printing plates.

Wear-resistant CFRP surface for temperatures up to 130 °C. Warp-free aluminium support of 4 mm. Alternative build platform for the Ultimaker S3. Designed for Fiberthree polyamides with high adhesion to printing plates.

Wear-resistant CFRP surface for temperatures up to 130 °C. Warp-free aluminium support of 4 mm. Alternative build platform for the Ultimaker S5. Designed for Fiberthree polyamides with high adhesion to printing plates.