Steel door spindle 8 mm with M12 threaded roller and eccentric drill hole
Change pin with screw and front-end bore
CHPIN-F.DRFRN-THR12-ST-(ZN)-8X90
Art.-no.
0688195690
EAN 4053479307169
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Best-possible connection
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Notice
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Product information
Datasheets(X)
Application area
For apartment entrance doors.
Instructions
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 90 mm |
Square size | 8 mm |
DIN direction | DIN R/L |