Smooth PEI sheet steel print sheet for the Original Prusa MK4S and CORE One

Overview

• Heatbed with embedded magnets that can withstand high temperatures


• These magnets hold the removable spring steel sheets in place


• This is ideal for printing PLA and offers excellent adhesive properties for almost all materials


• If small marks are left on the print surface by the print nozzle or a tool, these will generally appear shinier than the rest of the sheet but will not adversely affect functionality or adhesion


• If small marks are left on the print surface by the print nozzle used or by a tool, these will generally appear glossier than the rest of the sheet but they will not adversely affect functionality or adhesion.

Advantages

• Ideal for PLA


• Good adhesion on almost all materials


• Smooth print underside


• Small details adhere extremely well

Disadvantages

• When printing PETG, do not clean with IPA beforehand


• Release agents may be required


• You must apply an adhesion promoter/separation layer when printing flexible materials

Consumables such as PEI sheets (smooth, textured etc.) are excluded from the warranty as the coatings are designed to diminish over time. The warranty still applies in the case of failure due to material or manufacturing faults. Cosmetic damage including but not limited to scratches, dents, cracks and other cosmetic faults are also not covered by the warranty. Only sheets that are defective on arrival are covered by the warranty.