Welcome to Würth Industry For trade customers only
Sealing primer - CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML Sealing primer - CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML
Sealing primer - CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML - 1
Sealing primer - CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML - 2

Sealing primer

Penetrating primer
CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML

Art.-no. 089318
EAN 4011231833318
All versions

Prices for customers after login

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 125,000 products

Colourless priming of natural wood surfaces for removing unevenness and raising wood fibres for sanding in between coats.

Primer


  • The sealing primer straightens the wood fibres

  • Sanding in between coats produces a smooth surface


Uniformity


The deep-action effect of the sealing primer creates a more even surface.



Cost-effective


Economical pre-treatment of surfaces. There is no need to use an expensive final varnish.

Notice

The sealing primer is not suitable for synthetic resin paints. Upturn the can after use and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Primer for wood (untreated softwoods and hardwoods).

Instructions

Shake the can vigorously and perform a spray test. Evenly and lightly spray the natural wood with sealing primer to obtain a transparent covering, holding the can 20-30 cm from the surface; allow to dry. Then use a fine sandpaper to sand the dry surface and upright wood fibres smooth. Dust off the wood surface to remove dirt and paint particles. Now apply the final protective surface coating of anti-fogging clear varnish spray.

Chemical basis

Nitroacrylate

Contents

400 ml

Colour

Transparent

Shelf life from production

60 Month

Ignition temperature

365 °C

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Hook-and-loop hand sanding block
Hook-and-loop hand sanding block

SNDBLOCK-HAND-70X120MM

The moulded back of the block fits perfectly into the palm of the hand.
x 1 pcs
Spraymaster spray can attachment
Spraymaster spray can attachment

ATTCH-SPRCAN-F.PNTSPR-SPRAYMASTER

The practical attachment for your spray cans
x 1 pcs
Clear varnish
Clear varnish

CLRLACSPR-MATT-ANTIFOGGING-400ML

Makes minor surface damage such as scratches, scrapes and chafe marks virtually invisible
Clear varnish
Clear varnish

CLRLACSPR-SEMIGLOSS-ANTIFOGGING-400ML

Makes minor surface damage such as scratches, scrapes and chafe marks virtually invisible
Dust binder cloth
Dust binder cloth

DSTCLTH-80X50CM

For binding even the finest dust before painting work.
x 5 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Spare parts for this product:
Replacement spray head For spray cans
Replacement spray head For spray cans

REPLNOZ-F.PNTSPR-RD

x 6 pcs
Replacement spray head For spray cans
Replacement spray head For spray cans

REPLNOZ-F.PNTSPR-FAN

x 6 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details