Render bead 3D membrane with protective lip
Render bead 3D membrane with protective lip
RENDBEAD-3D-MEMBRANE-LIP-L2,4M
Register now and access more than 125,000 products
- Plastic profile with elastic sealing lip and PE sealing tape for an optimal cleaning connection through perforated and depressed centre plastering leg
- Flexible transition to the protective tab and self-adhesive tape to hold the protective film
- Clean termination, no rigid connection of the cleaning cup, flexible connection without screw connection
- Permanent sealing, maintenance-free joints thanks to optional butt connectors
- Simple processing, no subsequent cleaning, no additional adhesive tape necessary.
All substrates must be flat, dry, free from adhesion-reducing residues, free from dust and grease and suitable for bonding.
- An adhesion test must be carried out
- For special surfaces (varnishing or powder coating), the substrate must be pretreated before the profiles are applied. In this case, contact the window or door supplier
- Processing temperature +5 to +40 ºC
Corresponds to Class A of the VDPM guideline.
Datasheets(X)
All surfaces must be flat, dry, free of adhesive-reducing residues, free of dust and grease and suitable for bonding.
Material | PVC - Polyvinyl chloride / PC - polycarbonate |
Adhesive system | Self-adhesive |
Width | 15 mm |
Length | 2400 mm |
Material of lip | Thermoplastic elastomers |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!