For detailed information, other images and documents, please select individual articles from the following table.
FFF spare part UltiMaker AA S7/S5/S3/3 print core
The original print core AA is a replaceable print head that has been specifically developed for Ultimaker printers series 3 and above. AA cores feature a specially developed internal geometry that is suitable for all standard filaments, though not for PVA or abrasive filaments. PVA in this extruder will result in irreparable blockages and should be printed using the BB core specifically designed for this purpose. The CC core is available for abrasive materials.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
The print head (printcore) AA is available in 3 different nozzle diameters: 0.25 for fine resolutions, 0.4 mm (standard) or 0.8 mm for low resolution and rapid printing. The system as a whole comprises holder, filament feed, electronic identification, hot-end and nozzle.
Note: The print core unit (print head) can only be replaced as a complete unit on all Ultimaker print cores. The nozzles cannot be unscrewed and individually replaced.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!