Torque wrench for plug-in head Stahlwille MANOSKOP® 730 Fix
For detailed information, other images and documents, please select individual articles from the following table.
Torque wrench for plug-in head Stahlwille MANOSKOP® 730 Fix
For work in series production
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Triggered with double stop signal
- Adjustment knob can be unscrewed after setting the release torque
- The supplied TX® Tamper Resistant locking screw protects against tampering, as do the enclosed adhesive seals. No adjustment possible without breaking the seal
- Does not need to be reset to "0"
- The measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double scale: Nm/ft·lb
- Drive for interchangeable plug-in torque wrench heads
- With QuickRelease safety lock
- Trigger mechanism insensitive to continuous and counter loads (up to the max. measuring range of the torque wrench)
- Anti-clockwise tightening by turning over the plug-in torque wrench head
- Optimal calibration with the perfectControl® calibration system no. 7794 or calibration systems no. 7706, 7791
- Easy adjustment from the outside via two adjusting screws without the need for disassembly
- With 2-component handle
- Calibration certificate in accordance with DIN EN ISO 6789-2:2017
- Display deviation value ± 3 %
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!