Torque angle gauge Stahlwille 7385N
For detailed information, other images and documents, please select individual articles from the following table.
Torque angle gauge Stahlwille 7385N
For tightening screws at a defined angle, with stationary reading point
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- two inclined scales for reliable reading at any angle
- with screw-off magnet for attaching a socket with 1/2 inch square
- for use with a tightening tool, e.g. Service MANOSKOP® no. 730N
- because a defined setting torque must first be applied when tightening screws at a specific angle, a torque wrench with a capacity that covers both the setting torque and the tightening force required to reach the tightening angle should always be used as the tightening tool
- the torque angle gauge - with 1/2 inch or 3/4 inch square - is selected according to the square of the tightening tool
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!