FDT 533 tester For smoke switch
For detailed information, other images and documents, please select individual articles from the following table.
FDT 533 tester For smoke switch
For flue gas testing smoke switches and smoke detectors.
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Holder for test aerosol 918-5
- Can also be used for testing smoke detectors from the SecuriStar detector series
Notice
The test device consists of a test container for the test gas cylinder, a triggering lever with a sliding mechanism and an adapter for mounting on a corresponding picker rod.
The picker rods and the 918-5 test gas must be ordered separately. Caution: The P-250 test gas does not fit into the test device.
Dimensions subject to change. Subject to technical changes.
Instructions
- Insert the test aerosol 918-5 bottle into the FDT 533 tester
- Loosen the knurled thumb screw, fold the triggering bracket handle back and insert the bottle into the test bottle holder
- On insertion, check the alignment of the nozzle
- The nozzle must be aligned so that the test aerosol can escape from the centre of the tester outlet
- Fix the bottle in the tester by tightening the knurled thumb screw
- Proceed in reverse order to remove the bottle
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!