Single anchor point For rope access
The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Single anchor point For rope access
Fall arrester system for simple, fast attachment to steel and concrete
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Can be used as an intermediate or end/corner support in safety harness systems
- Resistant to corrosion and ageing The single anchor point is made from stainless steel (at least grade A2)
- Quick and easy anchor point installation and removal
- Space-saving
- Product is available with concrete screw art. no. 0838906394 and fixing bolt anchor art. no. 0838906395 as fastening material
Notice
- Fastening material is included in the scope of delivery (except mortar compound)
- Observe the installation instructions and approvals for the fasteners and single anchor point.
- European Technical Assessment (ETA) 20/0965
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Application area
- Suitable for securing up to a maximum of three persons in conjunction with fall protection PPE
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The single anchor point/terminal may only be fixed in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12 or on steel using the specified fixing elements only
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!