Plus rebar cutter
The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Plus rebar cutter
Very robust rebar cutter with tool holder suitable for SDS-plus. For hammer action in hammer drills.
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Very robust with optimum power transmission, as the drill bit is produced from a single piece.
- Particularly efficient and consistently high cutting speed over the entire service life due to hammer action.
- Extremely long service life thanks to specially developed tungsten carbide
- The single-piece 4-cutting edge tungsten carbide element with 12 and 14 mm diameter prevents catching on reinforcement.
Notice
Caution: Reinforcing bars may only be drilled through with permission from a structural engineer.
Application area
For drilling reinforcement steel
Instructions
Application with hammer action function
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!