For detailed information, other images and documents, please select individual articles from the following table.
Quick-setting assembly cement
Register now and access more than 125,000 products
Packaging unitThe packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Structure of our article numberThe article number is made up of the following: VVVVAAABBB
Information on price displayPrice per packaging unit (PU):
QuantityThe quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
Does not contain chloride, and is therefore not corrosive
For universal use indoors and outdoors
Quick installation with earlier load-bearing capacity
Protect from frost!
All clean and load-bearing, solid, non-slip, mineral and permitted surfaces are classed as suitable surfaces. (Gypsum surfaces must be primed beforehand with CERAfix 101). Do not mix with other substances (such as gypsum). Do not over-water. Do not use in a pourable state. The processing time is based on an air and object temperature of +20°C. Do not mix with other materials (e.g. gypsum). It is essential that the repair cement is not over-watered. Repair cement must not be applied in a pourable state.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For temporary and secondary fastenings. For installing and anchoring doors and window frames, shuttering, flush-mounted boxes as well as for sealing seepage points in masonry, concrete and cement pipes. For anchoring anchor screws, dowels, masonry hooks, pipe clamps and much more.
All clean and load-bearing, solid, non-slip, mineral and permitted surfaces are classed as suitable surfaces.
Add approx. 0.3 l of water to 1 kg of repair cement and stir until it forms a workable compound. The repair cement must be applied immediately, as it becomes extremely hard in a few minutes. Setting time is delayed when temperatures are low or the material is cold. Moisten the deepened hole in the wall with water and let it dry until matt moist before inserting masonry hooks and dowels.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!