For detailed information, other images and documents, please select individual articles from the following table.
Priming Rendering base
White-pigment, solvent-free special primer with quartz for optimum adhesion and grip for indoor and outdoor use
- Chemical basis: Acrylate dispersion
- Colour: White
- Density: 1.65 g/cm³
- pH value: 11
- Grain size: 0.5 mm
- Application conditions: dry
- Drying time: 8 h
- Conditions for drying time: at 20°C
- Min. processing temperature: 5 °C
- Min. surface processing temperature: 5 °C
- Solvent-free: Yes
- VOC concentration (CH): 1 g/l
- Min. application quantity in weight/area: 350 g/m²
- Max. application quantity in weight/area: 400 g/m²
- Weight of content: 15 kg
- Container: Bucket
- Shelf life from production: 24 Month
- Conditions to maintain shelf life from production: cool and frost-free storage area, in sealed original container
- show more ... show less ...
Exclusively for trade customers
Register now and access more than 125,000 products
Packaging unitThe packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
Structure of our article numberThe article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
Information on price displayPrice per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
QuantityThe quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
For wall and ceiling surfaces
Can be used as a decorative final coating as well as adhesion promoter for subsequent coatings with mineral, silicate and synthetic resin plasters.
- Apply with a paint roller, brush, paintbrush or suitable spray device
- it is possible to obtain a spraying consistency by adding just a little water for machine application
The product is ready for use, provides good coverage and can be tinted.
Do not work surfaces already coated with a rendering base must with gypsum or cement-based fillers. The object and ambient temperatures must not drop below 5°C.
40 items on one pallet
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
The rendering base is a water-based, adhesion-promoting special primer for subsequent coatings with mineral, silicate and synthetic resin renders. All textured renders (e.g. rolled render, textured plaster, pebbledash) can be lightly mounted and textured on the touch-dry surface. The rendering base is also ideally suited as a base coat for screed techniques with glazes and emulsion and silicate paints.
Can be used on concrete, cement and lime cement plaster, gypsum surfaces, fibre cement and gypsum board, absorbent dispersion plaster and colour paints.
The surface must be dry, load-bearing and free from release agents (dust, formwork oil, grease etc.). Remove old wallpapers, poorly adhering paintings or distempers using Würth wallpaper stripper. Also remove loose rendered parts. Prime highly absorbent, sandy or chalky surfaces. New renders must have dried out for at least 14 days and treated with a fluosilicate solution (if the render has been drying for 4 weeks, applying a fluosilicate solution is not necessary). Pre-fill deep holes and chips with Würth joint and surface filler.
The rendering base can be applied with a paint roller, brush, paintbrush or suitable airless spraying device. When applying with the spraying device, the max. grain size of 0.5 mm must be observed.
The coated surfaces can be processed further once fully dried. Depending on the surface absorbency, temperature and ambient conditions, the drying time is approx. 8 hours. Surfaces already coated with a rendering base must not be worked with gypsum or cement-based fillers.
Clean all equipment with water immediately after use.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!