Nail HN 101
Nail HN 101 - 1
Nail HN 101 - 2

For detailed information, other images and documents, please select individual articles from the following table.

Nail HN 101

For use in steel and concrete substrate

  • Material: Steel
  • Surface: Zinc plated
  • Shaft diameter: 3.7 mm
  • Head diameter: 8 mm
  • Suitable for device type: Würth DIVA 1/Premium, Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5

See product details

Available in 15 versions

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Variants

You can refine your search by selecting different attributes

Art.-no. Shaft length Material Surface Shaft diameter Quantity PU
price/PU
0864101016
16 mm Steel Zinc plated 3.7 mm
100 pcs
0864101019
19 mm Steel Zinc plated 3.7 mm
100 pcs
0864101014
14 mm Steel Zinc plated 3.7 mm
100 pcs
0864101022
22 mm Steel Zinc plated 3.7 mm
100 pcs
0864101032
32 mm Steel Zinc plated 3.7 mm
100 pcs
0864101027
27 mm Steel Zinc plated 3.7 mm
100 pcs
0864101047
47 mm Steel Zinc plated 3.7 mm
100 pcs
0864101037
37 mm Steel Zinc plated 3.7 mm
100 pcs
0864101052
52 mm Steel Zinc plated 3.7 mm
100 pcs
0864101072
72 mm Steel Zinc plated 3.7 mm
100 pcs
0864101062
62 mm Steel Zinc plated 3.7 mm
100 pcs
0864101057
57 mm Steel Zinc plated 3.7 mm
100 pcs
0864101090
90 mm Steel Zinc plated 3.7 mm
100 pcs
0864101100
100 mm Steel Zinc plated 3.7 mm
100 pcs
0864101042
42 mm Steel Zinc plated 3.7 mm
100 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Datasheets()

Datasheets ()

CAD data  | 

Certificates/Documents

 | 

 | 

Technical information

Exclusively for trade customers

Register now and access more than 125,000 products

Prices for customers after login

Nails with shaft lengths of 72, 90 and 100 mm must be pre-tapped into place with a hammer. Please observe the corresponding device category when selecting your fasteners



Length calculation for nails used on concrete surfaces:


Penetration depth (min. 25mm / max. 40mm) + thickness of component to be fastened = nail or shaft length



Length calculation for nails used on steel surfaces (min. 5mm thick):


Penetration depth (min. 8mm / max. 12mm) + thickness of component to be fastened = nail or shaft length

All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.