Intumescent mat plus
For detailed information, other images and documents, please select individual articles from the following table.
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- 0 mm spacing between the insulation is possible
- Foams in the event of fire
- Easy to install, including at a later point in time
- No material exchange in fire areas
- Wall and ceiling ducts R 90 in solid structures P-3680/8053-MPA BS
- Wall ducts R 90 for lightweight partition walls P-3682/8073-MPA BS
- Wall and ceiling ducts R 90/R120 P-2400/985/19-MPA BS
- Wall and ceiling duct 90 or 120 minutes Z-19.53-2565
- Fire resistance rating of 90 or 120 minutes
Application area
For use in the system [C] + [H2]
- Fire partition W combination [C]
- Pipe partition intumescent mat plus [H2]
For wall and ceiling ducts of flammable and non-flammable pipes that have flammable insulation, e.g. for cold piping insulated with rubber foam refrigeration insulation
Instructions
- Material is placed around the insulation with a thickness of 1.1 mm in 2 layers and fixed to the insulation with steel wire (at least 0.8 mm)
- When using mineral wool or foam glass, building materials class A, only one layer is necessary
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!