Warning adhesive tape, non-slip, standard
For detailed information, other images and documents, please select individual articles from the following table.
Warning adhesive tape, non-slip, standard
Non-slip reflective tape for hazardous areas in indoor and outdoor areas, such as the edge of steps and ramps, working areas, lifting platforms, workshop pits and wet areas.
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
Notice
- Yellow-black tape for permanent hazard points and obstacles
- The butyl primer should be used outdoors. This significantly increases the adhesive strength of an adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Application area
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!