Fire protection foam 90
For detailed information, other images and documents, please select individual articles from the following table.
Fire protection foam 90
Two-component fire protection foam with silicone base and outstanding fire protection properties
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Easy and quick sealing
- Especially well-suited for retrofitting
- Installation depth of just 15 cm
- No coating is required on cables under a diameter of 20 mm, cables larger than 20 mm should be coated with fire-retardant coating article No. 0893303006
- Fittings can be cut to any size
- 1 year shelf life even if used several times
Proof of Performance
- Wall and ceiling ducts fire-resistant Z-19.53-2358
- Wall and ceiling ducts fire-resistant R90 Z-19.53-2538
Notice
- Flammable pipes are to be processed with the Würth intumescent strip [68] according to approval Z-19.53-2538
- Use suitable valve pliers
- Only for solid parts (with S 90 cable partitions). For pipe partitions, can also be used in light partition walls.
Clean opening
Affix ID plate
Introduce fire protection foam 90 (optionally, insert a shaped piece)
Smooth surface
- Wall and ceiling ducts fire-resistant Z-19.53-2358
- Wall and ceiling ducts fire-resistant R90 Z-19.53-2538
Application area
For installation in system [D1] with fire protection foam 90 [D1]
- For wall and ceiling ducts with a fire resistance class of "fire-resistant" in accordance with DIN 4102, part 9 for cables, cable bundles and cable support systems.
- For wall and ceiling ducts with a fire resistance rating of "fire-resistant" in accordance with DIN 4102, part 11 for flammable and non-flammable pipes.
- For walls and ceilings up to a maximum opening size of 500 cm2. The maximum height of 20 cm or maximum width of 50 cm may not be exceeded. For fire-resistant pipe ducts, an opening diameter of 25 cm must not be exceeded.
Instructions
- Always shake can well before use
- Fittings can be cut to any size
- If work is interrupted for longer than 5 minutes, replace the adapter
- Only for solid parts (with fire-resistant cable partitions)
When used with fire-resistant pipe partitions, can also be used in non-load bearing partitions
- Once the can is open, clean the valves with silicone remover art. no. 0893222600 and shake
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!