For detailed information, other images and documents, please select individual articles from the following table.
Fine filler with high elasticity for sealing pores and for repairing small scratches, grooves and uneven surfaces
Register now and access more than 125,000 products
Packaging unitThe packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Structure of our article numberThe article number is made up of the following: VVVVAAABBB
Information on price displayPrice per packaging unit (PU):
QuantityThe quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
Finely matched filler and resin combinations
Saves time as further processing can continue directly (sanding, filling and applying top coat)
Easy to sand
Brilliant white pigmentation
Temperature-resistant up to 80°C
Tip: Before the final coating, skim the repaired spot with 1-component or 2-component universal primer, HS filler or Rust Stop Quattro (to eliminate the risk of visible repair edges or gloss reduction)
Maximum permissible VOC content of VAKU 20: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 2 g/l
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For eliminating minor paint damage, scratches and for closing pores and uneven areas in filling and universal filling applications.
Extremely fine surface processing to ensure an optimum finish.
Suitable as a fine filler or universal filler for all types of wood. Not suitable for oily types of wood. Do not use on heavily weathered surfaces.
The surface must be clean, dry and free from grease
Due to water sensitivity, polyester material should only be sanded when dry where possible
To prevent possible complaints, always ensure the correct dosing ratio of filler to hardener is used
Dosing: 2% hardener
4-5 minutes at 20°C
20-30 minutes at 20°C
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!