Fiberthree F3 PA-GF30 Pro FFF printing material
For detailed information, other images and documents, please select individual articles from the following table.
Fiberthree F3 PA-GF30 Pro FFF printing material
Polyamide technical filament modified for 3D printing with additional glass fibre filler
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- The glass fibres minimise shrinkage, which significantly reduces the risk of warping
- The material exhibits a very high level of strength with very low warping tendency and very good layer adhesion
- The good heat and media resistance make it suitable for all applications for high-strength, lightweight parts. Suitable for use in autoclaves up to 180 °C - non-conductive
- Rough, matt surface finish. Very rigid filament, which can break in the feed if bending radii are small
- The material differs from F3 PA-GF Pro in its increased stiffness
Advantages
- High-performance PA 6-based polyamide (modified)
- 30 % glass fibres by weight
- High strength - excellent pressure resistance
- Low warping
- Good adhesion to printbed
- Matt black finish
Application instructions
- The use of abrasion-resistant nozzles is strongly recommended
- The filament must be stored and printed in a dry environment for the best printing results
- A drying box and drying agent/desiccant are recommended
Notice
The use of abrasion-resistant nozzles is strongly recommended. The filament must be stored and printed dry for the best printing results.
Application area
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!