The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
FFF printing material F3 PA-GF Pro Fiberthree
Polyamide technical filament modified for 3D printing with additional glass fibre filler
Register now and access more than 125,000 products

Variants
Register now and access more than 125,000 products
- The glass fiber reduces shrinkage, which significantly reduces the risk of warping
- The material exhibits enormous strength with residual impact resistance, very low warping tendencies and very good layer adhesion
- The good heat and media resistance make it suitable for all applications for high-strength, lightweight parts
- Rough surface finish with matt gloss
- Very rigid filament, which can break in the feed if bending radii are tight
- The material differs from F3 PA-CF Pro due to the non-conductive nature of the fibres at slightly lower strengths
The use of abrasion-resistant nozzles is strongly recommended. The filament must be stored and printed dry for the best printing results.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!