The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
For the permanent sealing of all connection joints to ensure that they are air-tight and windproof and for fitting indoor and outdoor windows and doors.
Register now and access more than 125,000 products
Packaging unitThe packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Structure of our article numberThe article number is made up of the following: VVVVAAABBB
Information on price displayPrice per packaging unit (PU):
QuantityThe quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
Functional hardness achieved rapidly
Can be used without clamping batten in line with DIN 4108-7 (2011-01) for joints and connections in new and renovated buildings.
Guarantees rain-proof seals after curing
Achieves the necessary airtight bonds/sealing of structural membrane.
Broad adhesive range
Good stability (thixotropic)
Does not corrode metals
Compatible with paint
Silicone- and solvent-free
Classified as EMICODE class EC1PLUS in accordance with GEV criteria (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e. V. — German Association for the Control of Emissions in Products for Flooring Installation, Adhesives and Building Materials e. V.)
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Permanent elastic, air-tight joint, component connection and impact overlap bonding/sealing of steam locks, steam brakes and sealing films in dry construction (except for swimming pool areas) as well as all WÜTOP subsupertracks, underdeck tracks, facade tracks and WÜTOP thermo films to be used only on the non-woven side according to the energy saving regulation EnEV 2016.
Bonding/sealing of diffusion-tight and diffusion-open sealing tapes during both window and door installation on absorbent substrates.
For more information, please refer to the technical data sheet.
The surfaces must be clean, dry and free from
grease. For pre-treatment, refer to the technical data sheet.
Cut off the thread cap, screw on the nozzle and cut it to the required width. Apply the adhesive using a suitable application gun.
The adhesive is applied on one side (as a 4–8 mm thick bead) to the film or the load-bearing construction material (can also be applied to slightly damp, dusty or absorbent surfaces).
The film is then bonded with a discharge loop for strain relief while the adhesive bead is still wet and pressed lightly to fix it in place (do not press the bead flat; the bead should retain a thickness of ≥1 mm).
Detached compounds can be joined together once again due to the self-adhesive properties of the adhesive.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!