Butt connector for LFKS sheet steel cable routing conduit
For detailed information, other images and documents, please select individual articles from the following table.
Butt connector for LFKS sheet steel cable routing conduit
Used for mechanical and electrical connection
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- With a 6.3x0.8 mm blade connector for connecting an earthing cable with female spade connector
Notice
Two connectors are required per butt joint. In the case of coated profiles, the coating is slightly scraped off during clamping to ensure conductivity.
Application area
The butt joint connector is clamped into the cut edge of two LFKS lower parts to create a mechanical and electrical connection (potential equalisation).
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!