Assembly set for MG III fire protection cement
For detailed information, other images and documents, please select individual articles from the following table.
Assembly set for MG III fire protection cement
Included in the scope of delivery are 2 identification plates, 1 approval, and 1 installation instructions
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Seals against fire and combustion gases, temperature-reducing, room-sealing, resistant to spray and extinguishing water jets, mechanically stable
- Suitable for pumping, pressing, and manual application
- Ready-to-use mixture
Instructions
Clean the opening and pre-wet the component reveal
Premix dry cement. First put water, then cement into the mixing container. Mix for 4 minutes at 300-400 rpm.
Installation of the fire protection cement. Panel over larger ducts on one side.
Affix ID plate
Clean the opening and pre-wet the component reveal
Premix dry cement. First put water, then cement into the mixing container. Mix for 4 minutes at 300-400 rpm.
Installation of the fire protection cement. Panel over larger ducts on one side.
Affix ID plate
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!