Register now in three simple steps to use all functions of the Online-Shop.
Sales to trade customers only
The QR-Code is no longer valid. Please click on the following button to activate it again.
Sort by
52 articles with 545 variations found
PLA NX2 is made from a renewable biopolymer. It combines good mechanical properties with a high degree of flexibility. It is suitable for industrial use, rapid prototyping, architecture, food applications etc. The raw material is approved in accordance with REACH, RoHS and FDA standards.
PLA is a biodegradable polymer with a low melting point that is particularly easy to print.
Technical filament made of polyamide modified for 3D printing with additional fibreglass filler.
DuraPro ASA is a weatherproof and UV-resistant copolymer for industrial applications. It is marked by a high level of process reliability and is perfect for components under high mechanical stress. The material is electrically insulating. DuraPro ASA is optimised for good layer adhesion, thermal stability, better flow properties and low warping. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Combines easy processability and very low moisture absorption with excellent strength.
Ultrafuse® PAHT CF15 is a high-performance 3D printing filament that opens up new application areas in FFF printing. It can be used in any FFF printer with a hardened nozzle. It is also compatible with BVOH, a water-soluble support material, and HiPS, enabling complex geometries to be printed for the most demanding operating environments. Ultrafuse® PAHT CF15 combines high levels of temperature and chemical resistance with excellent mechanical strength. Its excellent dimensional stability means there is minimal shrinkage of the printed component during printing, allowing for a straightforward printing process. The properties of the fibres ensure that the parts remain very strong and extremely stiff.
Ultrafuse® PC GF30 is a unique blend of PC and 30 % fibreglass specially developed for FFF printing. With a high level of heat resistance and good dimensional stability, Ultrafuse® PC GF30 is the ideal material for use in an industrial environment in which good temperature resistance and a high level of strength are required. Its UL94 V0 rating makes PC GF30 the perfect solution for applications in the transport industry requiring flame protection. Resistance to UV light and low moisture absorption make Ultrafuse® PC GF30 particularly suitable for indoor and outdoor applications.
Greentec Pro is a high-performance biopolymer with optimised characteristics for technical and mechanical applications. This material offers excellent temperature resistance and layer adhesion, combined with a semi-gloss surface. Greentec Pro is certified in accordance with the FDA, REACH and RoHS standards.
ABS is strong and flexible with a high level of heat resistance.
Extrudr FLAX is made from renewable raw materials and, thanks to the added mineral filler, enables fast production speed. The material was developed for rapid prototyping applications. At high temperatures and a steady print speed, the surface becomes rough and resembles sandstone. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Ultrafuse® ABS Fusion is an engineering material that is easy to print and enables a much more efficient printing process.
In addition to its high heat resistance, ASA offers high weather resistance outdoors.
PA offers high strength, rigidity and good thermal distortion stability.
Greentec is a biopolymer specifically designed for high performance applications requiring high temperature resistance and good mechanical properties. In addition, the raw material is approved in accordance with the FDA, REACH and RoHS standards.
TPU FLEX is a durable elastomer based on polycaprolactone polyester. It was specially developed for industrial applications and is excellently suited to the production of elastic and damping components. The material is optimised for the FFF/FDM process in terms of thermal stability and better flow properties. The raw material complies with REACH and RoHS standards.
TPU 85A (Shore hardness 85A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
TPU 64D is the hardest elastomer in the flexible product line. It has a relatively high rigidity while maintaining a certain level of flexibility.
TPU 95A (Shore hardness 95A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
rPET is a sustainable, high-performance filament made from recycled PET.
Extrudr BioFusion is a new generation of special organically based materials developed for designers and makers. The material is available in lively colours. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Technical filament made of polyamide modified for 3D printing with additional carbon fibre filler.
BVOH is a water-soluble support filament.
Ultrafuse® PA6 GF30 is a unique compound specially developed for FFF printing. The fibreglass content of 30 % means that parts have a lower tendency to warping. In addition, the excellent layer adhesion and compatibility with the Ultrafuse® BVOH water-soluble support make this material the perfect solution for developing industrial applications on an FFF printer. With its high levels of wear resistance, chemical resistance, stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide range of applications in the automotive, electronics or transport industries. Ultrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tools, transportation, electronics, small appliances, sports and leisure.
PP is a high-performance thermoplastic with low density, high elasticity and high fatigue resistance.
PCTG is a modified copolyester for the highest industrial requirements. The material combines high chemical and thermal resistance with mechanical properties such as high impact strength, high scratch resistance and excellent optical luminosity. In addition, the PCTG has flame-retardant properties in accordance with UL94 V2 and HB. It also meets numerous certifications (cosmetics, FDA, Reach, RoHS).
Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and features an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals. Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and delivers an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals.
ABS filament that boasts excellent heat resistance and a hard scratch-resistant surface. Due to its many advantages, ABS plastic is used in a variety of applications outside of 3D printing, including in many household and consumer products.
Extrudr PEARL is made from renewable raw materials and developed for rapid prototyping applications. The material offers excellent tensile strength properties. The raw material is approved in accordance with REACH, RoHS and FDA standards.
PLA PRO1 is an extremely versatile, robust bio-based PLA filament for professionals. It reduces the printing time (depending on the printer and object) and the strength outperforms the mechanical properties of printed ABS parts. Printer settings can be adjusted to achieve extremely high speeds or an unrivalled surface finish. Ultrafuse® PLA PRO1 has been developed as a high-speed engineering thermoplastic that is as easy to print as PLA at speeds previously considered unfeasible. Nevertheless, it has far superior mechanical properties that even surpass printed ABS objects - something that the most demanding users always had to compromise on before Ultrafuse® PLA PRO1.
Ultrafuse® Support Layer filament has been developed for use in combination with Ultrafuse® Metal filaments. When printed between the support and the object, it creates a barrier during sintering and makes it easier to separate the support from the metal part. Ultrafuse® Support Layer is not intended for printing stand-alone parts, but should be printed as a layer attached to the support structures in dual extrusion printing.
There are more hits. Please specify more details for more precise results.
Please check your search string or use another search term.
3D plastic printing DLP print material
3D plastic printing FFF consumables
3D plastic printing FFF print material
3D plastic printing FFF printer
3D plastic printing FFF spare part
3D plastic printing SLS print material
