In slechts drie stappen bent u geregistreerd en kunt u alle functies van de webwinkel gebruiken.
Verkoop alleen aan ondernemers
De QR-code is niet meer geldig. Klik op de volgende knop om die opnieuw te activeren.
Sortering
52 artikel(en) met 545 versies gevonden
PLA is a biodegradable polymer with a low melting point that is particularly easy to print.
PLA NX2 is made from a renewable biopolymer. It combines good mechanical properties with a high degree of flexibility. It is suitable for industrial use, rapid prototyping, architecture, food applications etc. The raw material is approved in accordance with REACH, RoHS and FDA standards.
PC/ABS FR is a flame-retardant plastic blend.
rPET is a sustainable, high-performance filament made from recycled PET.
Extrudr BioFusion is a new generation of special organically based materials developed for designers and makers. The material is available in lively colours. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Extrudr PEARL is made from renewable raw materials and developed for rapid prototyping applications. The material offers excellent tensile strength properties. The raw material is approved in accordance with REACH, RoHS and FDA standards.
TPU FLEX is a durable elastomer based on polycaprolactone polyester. It was specially developed for industrial applications and is excellently suited to the production of elastic and damping components. The material is optimised for the FFF/FDM process in terms of thermal stability and better flow properties. The raw material complies with REACH and RoHS standards.
PLA Tough is ideal for sustainable, cost- and time-saving production of large components with impressive impact resistance.
Ultrafuse® ABS Fusion is an engineering material that is easy to print and enables a much more efficient printing process.
In addition to its high heat resistance, ASA offers high weather resistance outdoors.
Technical filament made of polypropylene modified for 3D printing with additional fibreglass filler.
Made from high-quality PET, easy to print and with a large printing operating window.
Technical filament made of polyamide modified for 3D printing.
PP is a high-performance thermoplastic with low density, high elasticity and high fatigue resistance.
PLA NX1 is made from a sustainable biopolymer that offers good mechanical properties. The material is suitable for industrial use, rapid prototyping, architecture, food applications etc. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Technical filament made of polyamide modified for 3D printing with additional carbon fibre filler.
Technical filament made of polyamide modified for 3D printing with additional fibreglass filler.
Ultrafuse® PP GF30 contains 30 % fibreglass specially developed for 3D printing filaments, making Ultrafuse® PP GF30 compatible with any conventional FFF printer. PP has lower moisture absorption than PA, making Ultrafuse PP GF30 fully printable without the need for drying. Combined with its high degree of fibreglass reinforcement and excellent chemical resistance, Ultrafuse® PP GF30 is the preferred filament for particularly harsh environments. Its UV resistance makes it more suitable than any other PP-based filament in applications with direct exposure to sunlight.
Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and features an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals. Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and delivers an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals.
PCTG is a modified copolyester for the highest industrial requirements. The material combines high chemical and thermal resistance with mechanical properties such as high impact strength, high scratch resistance and excellent optical luminosity. In addition, the PCTG has flame-retardant properties in accordance with UL94 V2 and HB. It also meets numerous certifications (cosmetics, FDA, Reach, RoHS).
Polyethylene terephthalate glycol (PETG) is one of the worlds best-known thermoplastic polymers. Extrudr XPETG Matt was developed for a wide range of applications for which the main requirement is a good balance between mechanical and optical material properties. The raw material is certified in accordance with REACH and RoHS standards.
Polyethylene terephthalate glycol (PETG) is one of the worlds best-known thermoplastic polymers. Extrudr PETG was developed for a wide range of applications for which the main requirement is a good balance between mechanical and optical material properties. The raw material is certified in accordance with FDA, REACH and RoHS standards. PETG is flame-retardant in line with UL 94 with a wall thickness of 3.2 mm.
Ultrafuse® PPSU has been specially developed for FFF printing and is based on state-of-the-art Ultrason® materials. Ultrason® resins are amorphous thermoplastics derived from polyethersulfone (PESU), polysulfone (PSU) and polyphenylsulfone (PPSU), offering a very high level of thermal resistance. With its broad spectrum of material performance benefits, Ultrafuse® PPSU can be successfully used in applications for which other plastics, such as polyamide, polycarbonate, polyoxymethylene and polyalkylene terephthalates, do not meet the performance requirements. Its inherent flame-retardant properties make it a particularly suitable material for the aerospace industry.
Greentec is a biopolymer specifically designed for high performance applications requiring high temperature resistance and good mechanical properties. In addition, the raw material is approved in accordance with the FDA, REACH and RoHS standards.
TPU 95A (Shore hardness 95A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
Extrudr WOOD is made from renewable raw materials such as lignin and other biopolymers. This wood-fibre reinforced plastic is characterised by exceptional processing properties. In addition, the raw material is approved in accordance with REACH, RoHS and FDA standards.
TPU 85A (Shore hardness 85A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
Er zijn nog meer zoektreffers. Voor een nauwkeuriger resultaat dient u uw invoeren verder te specificeren.
Controleer dit a.u.b. of gebruik een ander zoekbegrip.
3D plastic printing DLP print material
3D plastic printing FFF consumables
3D plastic printing FFF print material
3D plastic printing FFF printer
3D plastic printing FFF spare part
3D plastic printing SLS print material
