Polymer For tile adhesive CERAfix 420
Polymer for tile adhesive CERAfix 420
POLY-TLEADH-(CERAFIX-420)-5KG
CERAFIX
Register now and access more than 125,000 products
For improving the adhesion and deformability, for elastic tile bonding on complicated, including deformable and severely thermally and water-stressed surfaces
Liquid hardener for producing highly malleable S2 tile adhesives for outdoors and indoors for use with CERAfix system tile adhesive for tiling on tough and malleable substrates.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Liquid hardener for producing highly malleable tile adhesives, e.g. for outdoor and indoor CERAfix Plus system tile adhesives. For improving adhesion properties and malleability, for tiling on challenging substrates, including those that are malleable and subject to high thermal and water stresses
Place CERAfix 420 liquid component in a clean mixing bucket and stir with the respective tile adhesive into a homogeneous, lump-free mass. With a powerful agitator (approx. 500-700 rpm), a mixing time of approx. 3 min is needed. Water can be added to adjust the product-specific consistency (refer to the product technical data sheets!). After a maturation time of approx. 5 minutes, the mixture is stirred again intensively.
The respective technical data sheets are binding for the processing.
Colour | White |
Container | Canister |
Chemical basis | Polymer dispersion with fillers |
Datasheets (1)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
