Perforated sleeve WIT-SH WIT-SH for ALLROUNDER WIT-VM 250 injection systems
Perforated sleeve WIT-SH
ANC-(WIT-SH)-PLA-12X50
Art.-no.
090344 121
EAN 4048539418978
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
WIT-SH masonry and perforated sleeve
Masonry individual attachment (system with perforated sleeve WIT-SH):
- ALLROUNDER chemical injection mortar WIT-VM 250, anchor rod WIT-AS, female thread sleeve WIT-IG
- Required for anchoring in perforated brick masonry and aerated concrete (only WIT-SH 18x95)
- The anchor rods (WIT-AS) or female thread sleeves (WIT-IG) will be held centrally in the perforated sleeve during mounting
- The perforated sleeve barbs keep the perforated sleeve or anchor rod (short dimensions) from falling out during mounting — overhead mounting
European Technical Assessment ETA-13/1040: Individual attachment plus solid and perforated brick masonry, aerated concrete
(ALLROUNDER WIT-VM 250 chemical injection mortar, anchor rod WIT-AS, female thread sleeve WIT-IG)
Product information
Datasheets(X)
Type description | WIT-SH 12/50 |
Diameter | 12 mm |
Length | 50 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 0) | 55 mm |
Effective anchoring depth (h ef) | 50 mm |
Suitable for anchor rod | WIT-AS M6/50, WIT-AS M8/50 |
Required injection mortar | WIT-VM 250 |
Approval | ETA-13/1040 |