Multipurpose metal anchor W-MB with screw
Metal dowel W-MB zinc-plated steel with screw
DWL-MNT-W.SCR-(W-MB)-ST-(A1K)-M8X60MM
Art.-no.
0903900108
EAN 4065746285865
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Excellent hold in concrete and solid or hollow masonry
Zinc-plated steel body and polyethylene wall plug shaft
Two-part expansion system
For securing medium loads in concrete and masonry
Various types of screws with metric threads can be used
Removable mounting
No setting tools required for installation
Flush mounting
Two-part expansion system
For securing medium loads in concrete and masonry
Various types of screws with metric threads can be used
Removable mounting
No setting tools required for installation
Flush mounting
Product information
Datasheets(X)
Application areaMounting boilers, blinds, satellite dishes, door and window frames, panels, consoles, signs, cable trays, pipes, gates, handrails etc.
InstructionsDrill to the target diameter and depth.
Clean thoroughly.
Use a hammer to insert the anchor in the hole without a screw.
Put the part to be secured in place and insert the screw.
Tighten to the recommended torque according to the type of surface.
Clean thoroughly.
Use a hammer to insert the anchor in the hole without a screw.
Put the part to be secured in place and insert the screw.
Tighten to the recommended torque according to the type of surface.
Length | 60 mm |
Screw length | 60 nm |
Outer diameter | 14 mm |
Screw diameter | 8 mm |
Head type | Hexagon head |
Thread type | Metric thread |
Thread diameter | 8 mm |
Drill diameter | 14 mm |
Drilling depth | 66 mm |
Material | Hot rolled products of structural steels |
Material of expanding cone | Steel |
Surface | Zinc plated |
Tensile fracture load | 350 daN |
Product weight (per item) | 58.099 g |
Tightening torque in masonry | 7.5 Nm |
Tightening torque in concrete | 25 Nm |
Centre-to-centre distance (a) | 55 mm |
Minimum component thickness | 100 mm |
Edge clearance (a r) | 70 mm |