Manual drive-in stamp For system connector
Manual drive-in punch for system connector
MANDRIVINPNCH-F.SYSCON
Art.-no.
0683800461
EAN 4038898208341
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
- To efficiently mount system connectors that have been pre-drilled with CNC or VBL-2
- Flat mounting surface for connectors
- The fitting and drill hole are not damaged
- Wide mount for positioning on the edge of the material
- Joints are mounted according to the angle. With single-pins, the mount can be lowered
- For system connectors: SV 30, SV 20 E
Specified dimensions not binding. Subject to technical changes!
Product information
Datasheets(X)
Material | Steel / plastic |
Surface | 0 - not applicable |