Lightweight construction anchor W-KL
Lightweight construction anchor W-KL
DWL-(W-KL)-PLA-18X50
![](https://media.wuerth.com/source/eshop/stmedia/wuerth/images/std.lang.all/resolutions/category/78px/37127.jpg)
Register now and access more than 125,000 products
- High-quality ABS
- Fully resistant to rotting
- Thermally stable from -40°C to + 80°C
- Attachment via positive locking
- Anchorage without expansion pressure
- Small edge and axial clearance possible
- For mounting, we recommend the ASSY-D plug screw
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/37522.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/37523.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/37507.jpg)
Datasheets(X)
- For secondary attachments in aerated concrete
- For the attachment of components in conjunction with a wood or particle board screw (e. g. ASSY-D)
- Outdoors or in wet rooms in conjunction with a stainless-steel screw
Material | ABS |
Anchor diameter | 18 mm |
Type description | W-KL |
Nominal drill-bit diameter (d 0) | 10 mm |
Required particle-board screw diameter | 4.5 - 6 mm |
Hole diameter in component (d Bau) | 6.5 mm |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 80 °C |
Minimum component thickness (d) | 80 mm |
Embedding depth (h s) | 50 mm |
Centre-to-centre distance (a) | 100 mm |
Performance data | |||
Anchor diameter [mm] | Collar 18 | ||
Recommended tensile load | Aerated concrete PB2 | Frec. [kN] | 0,25 |
Aerated concrete ≥ PB4 | 0,33 | ||
Plasterboard wall ≥ 5 N/mm² | 0,33 | ||
Recommended shear load | Aerated concrete PB2 | Frec. [kN] | 0,30 |
Aerated concrete ≥ PB4 | 0,40 | ||
Plasterboard wall ≥ 5 N/mm² | 0,40 |
Characteristic values | ||
Axis distance | a ≥ [mm] | 100 |
Edge distance | ar ≥ [mm] | 100 |
Drill hole depth | t ≥ [mm] | 60 |
Embedment depth | hS≥ [mm] | 50 |
Minimum member thickness | d ≥ [mm] | 80 |
Thread dia. screw | dthr [mm] | 4.5-6 |
Nominal drill diameter | ddrl. [mm] | 10 |
Hole diameter in component | dcon [mm] | 6,5 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!