Light, pre-drilled sheet metal rail Aluminium (EN-AW-6063 T6)
Sheet metal rail Light pre-drilled
SHTMETRL-SOL-ALU-TRAPEZE-395MM-HO5MM
ZEBRA
Art.-no.
0865726041
EAN 4052703322213
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For mounting directly on the trapezoidal sheet
- The sheet metal rail is pre-drilled to 5 mm, meaning that it can be mounted on all conventional bead spacings without additional drilling
- With bonded EPDM sealing strip
Notice
- Not suitable for flat roof elevation mounting
- It should be ensured in advance that the sheet metal is sufficiently attached to the substructure. The maximum load-bearing capacity of the sheet metal should also be checked. Approval must be obtained from the manufacturer, particularly in the case of sandwich roofing elements. We recommend using ZEBRA DBS® 4.5 x 25 thin sheet metal screws with sealing washer for attachment.
Product information
Datasheets(X)
 | |
Length | 395 mm |
Height | 25 mm |
Width | 80 mm |
Number of D 5 mm holes | 12 PCS |
Material | Aluminium |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!