Welcome to Würth Industry For trade customers only

Jump starter 12V Li-Ion POWER

Jump starter 12V Li-ion POWER
JUMPSTRT-MOB-12V-LIION-POWER

Art.-no. 0772150100
EAN 4065746331067

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Powerful jump starter/booster with charging cradle for mobile use in the workshop or on the road

Easy and quick charging


  • The charging cradle connected to the mains allows easy and fast charging of the booster

  • The booster is always charged and ready for use when necessary

  • The charging cradle has a USB-C connector

  • Quick charging of the jump starter possible in 2.5 h with optional accessory power supply


Optimal operation


  • The charger clamps are selected based on geometry and a low pivot point, so that they can be optimally operated by all hand sizes and hand strengths

  • The clamp tips are kept flat so that even in narrow places the clamps still have safe and optimal contact with the battery terminals

  • The connection cable length including 60 cm clamps enables a connection distance of 120 cm

  • Good illumination of the application area by powerful LED light with 300 lumens, optionally 100 % or hazard flashing mode


Robust design and safe operation


  • Robust housing with matt plastic surface

  • Multiple fuse/protection guarantees safe operation

  • Integrated carry handle for maximum portability

  • Intuitive operation thanks to clear and minimalist LED display
Notice

The override mode must be used with extreme caution and only with deeply discharged batteries as battery detection, spark protection and reverse polarity protection are switched off!



Booster for use with the following battery types:


  • Open

  • Wet

  • MF - maintenance-free

  • VRLA

  • AGM

  • Gel

  • EFB and EFB+

  • Calcium
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Petrol/diesel engines with a 12 V battery supply

  • Displacement for petrol engines up to 10 litres and diesel engines up to 8 litres

  • Vehicles, lorries, cars, motorcycles, boats, caravans, tractors, mowers etc.

  • In the workshop or on the road
Instructions

1. Switch off the vehicle and remove the ignition key


2. Connect the switched-off and charged jump starter


3. Connect the red plus clamps to the battery plus and then the black minus clamps to the vehicle earth


4. Switch on the jump starter and start the vehicle


5. Turn off the jump starter


6. Remove the black minus clamp and then the red plus clamp

Suitable for max. cubic capacity

10 l

Rechargeable battery/battery capacity

6000 mAh

Max. current

4000 A

Nominal current

575 A

Width x height x depth

25.3 x 18.6 x 17.3 cm

Type of rechargeable battery/battery

Li-lon

Rechargeable battery/battery permanently installed

0 - not applicable

Number of rechargeable batteries/batteries

1 PCS

Material of housing

0 - not applicable

Colour

Black

Length (battery charging cable with terminals)

60 cm

Fully insulated charging terminals

Yes

Reverse-polarity protection

Yes

Spark protection

Yes

Overvoltage protection

Yes

Display

0 - not applicable

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information