Injectors disassembly set, mechanical 37 pieces

• Disassembling particularly heavily coked or rusted injectors


• The height of the support feet can be adjusted, so the bridge can be positioned exactly at a 90° angle to the injector, even when the support points are at different heights on the cylinder head


• Ideal for engines with 2 injectors that must be pulled simultaneously, since they are attached with only one double adjustable clamp, as in vehicles by Mercedes, Opel/Vauxhall, Fiat etc.


• The injection nozzles can be partially dismantled using the 2 socket wrenches included in the set in order to attach the corresponding puller adapters from the set directly in the injector


• The required tensile force is applied mechanically using a spindle/pressure bearing and nut

Scope of delivery

• 1x short bridge, 360 mm


• 2x crossbars


• 2x M18x1.5 feed shafts, length 220 mm


• 2x M18x1.5/M18x1.5 connection adapters


• 1x pressure bearing


• 1x pressure nut


• 3x support feet/bridge connection elements


• 4x support feet, top section


• 4x support feet, middle section


• 4x support feet, base


• 2x crossbars/bridge connection elements


• 2x Bosch M17x1/M27x1 adapters


• 2x Siemens M14x1/M25x1 adapters


• 2x Siemens M27x1 adapters


• 1x Piezo M14x1.5 adapter


• 1x Bosch SW10 socket with bore


• 1x Siemens 4-PIN socket


• 1x thread compound