Welcome to Würth Industry For trade customers only

Hot protective wax

Hot protective wax
POLWAX-WASHSYS-HOT-25LTR

Art.-no. 08930253
EAN 4038898935735
Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

For protecting vehicles in self-service washing systems and in car washes with hot-wax sprayers.

Produces a protective layer


  • Protects the vehicle surface against corrosion, salt, UV-rays

  • Allows rainwater to simply roll off

  • Dirt is easier to remove

  • Delays recontamination


High-quality components ensure an optimal shine


Well-kept appearance, looks as good new



Free of AOX and silicone



pH-value in the concentrate: 4–4.5



Free of mineral oils and hydrocarbons



Easily biodegradable in accordance with OECD*. Does not compromise the effectiveness of light fluid separators.

Notice

Store in a frost-free place! Avoid overdosing!


*OECD = Organisation for Economic Cooperation and Development

The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Instructions

In car washes:


Dispense undiluted into the hot-wash sprayer. Application concentration: approx. 0.2%



In high-pressure devices/self-service washing systems:


Stir 1 part hot protective wax to 9 parts water. Processing temperature: approx. +70°C to +80°C. Spray the product onto the clean vehicle while still wet; rinsing with cold water improves the flow behaviour and gloss pattern.

Chemical basis

Cationic surfactants

Smell/fragrance

Characteristic

Colour

Yellow

pH value

4

Conditions for pH value

at 20°C

Density conditions

at 20°C

Min. flashing point

65 °C

Density

0.985 g/cm³

Min. processing temperature

70 °C

Max. processing temperature

80 °C

Application concentration

0.2 %

AOX-free

Yes

Silicone-free

Yes

Mineral oil-free

Yes

Hydrocarbon-free

Yes

Weight of content

25.6 kg

Contents

25 l

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information