Welcome to Würth Industry For trade customers only
Gearbox oil TRIATHLON<SUP>®</SUP> Automatic Super - GEAROIL-(AUTOMATIC-SUPER)-20LTR

Gearbox oil TRIATHLON® Automatic Super

Gear oil, TRIATHLON Automatic Super
GEAROIL-(AUTOMATIC-SUPER)-20LTR
TRIATHLON

Art.-no. 0897410003
EAN 4049557838625
All versions

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Gearbox oil for universal use with high thermal stability and excellent low-temperature properties.

TRIATHLON gearbox oils are produced and packaged in compliance with the most stringent quality specifications in line with DIN EN ISO 9001


  • High product safety

  • Extensive manufacturer approvals


Only high-quality first raffinates and raw materials are used in TRIATHLON oils


Satisfies key specifications of automotive manufacturers



Outstanding protection against wear and corrosion

Notice

Observe the operating instructions of the vehicle and engine manufacturer for standard and extended oil change intervals.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Gearbox oil for universal use with high thermal stability and excellent low-temperature properties.

Contents

20 l

Type of oil

HC synthesis

Approved for gear oils

Dexron III H, Dexron III G, Dexron II E, Dexron II D, Allison C4, Caterpillar TO-2, Voith H55.6335.xx, MAN 339 Type V1, MAN 339 Type Z1, MB 236.1, TASA, Ford Mercon

Recommended applications for gear oils

ZF-TE-ML 02F, ZF-TE-ML 03D, ZF-TE-ML 09, ZF-TE-ML 11B, ZF-TE-ML 14B, ZF-TE-ML 04D, ZF-TE-ML 14A, ZF-TE-ML 17C

Shelf life from production

60 Month

Density

0.86 g/cm³

Density conditions

at 15°C

Min. flashing point

200 °C

Pour point

-46 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details