Felt polishing disc For fillet weld grinders
Polishing disc felt
POLDISC-FELT-BR25,4-D150
Register now and access more than 125,000 products
Fast and simple polishing
Highest-quality felt (100% sheep's wool)
Precision operation
The width of just 6 mm and the flexibility of the disc facilitates precision machining at the polishing site.
Machining in very tight spots
The felt polishing disc can be easily profiled using a file or sandpaper to adapt it to the area to be machined.
Max. 4000 rpm, recommended 1300 rpm
Apply respective paste with machine running!
Stainless steel, steel, non-ferrous metals and plastic parts and coatings.
- Important: If the individual work steps are not carried out carefully, flaws in the surface become even more obvious during buffing.
- Perform preliminary testing or conduct your own tests!
- The better the pre-sanding, the simpler and shorter the effort required for polishing.
- A separate felt segmented grinding disc should be used for each paste. This prevents mixing of different pastes and impairment of the result.
- Clean clogged felt segmented grinding disc by gently pressing with a wire brush.
- Remove polishing residues on the surface with Wiener Kalk.
- The application recommendations are of a general nature depending on how good the initial surface is or how high the requirements for the surface are.
Diameter | 150 mm |
Drill hole | 25.4 mm |
Thickness | 6 mm |
Min. recommended rotation speed | 1300 rpm |
Max. recommended rotation speed | 4000 rpm |
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
