FFF spare part UltiMaker CC S7/S5/S3/3 print core
UltiMaker CC S7/S5/S3/3 print core
ULTIMAKER PRINT CORE CC 0.4 S7/S5/S3/3
Art.-no.
4954629303
EAN 4099618410154
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
The original CC print core with a nozzle diameter of 0.4 mm is a interchangeable print core specially developed for the UltiMaker 3/S3/S5 and S7 for use with abrasive materials
- Composite filaments contain embedded fibrous material intended to enhance the mechanical properties of the printed object
- This additive, usually in the form of glass or carbon fibres, is highly abrasive and wears down standard brass nozzles extremely quickly
- Maintaining a smooth and unscathed nozzle interior, however, is essential for a clean printing process, which is why abrasive materials are always printed using harder hot-ends
- The nozzle is made from hardened steel with an extremely hard titanium nitride special ceramic coating
- The heater block is made from aluminium and is therefore extremely thermally conductive, reaching its target temperature faster
- The heatbreak is very thick and made from titanium, meaning it insulates more effectively against heat and is more robust
Product information
Datasheets(X)
Manufacturers | UltiMaker |
Diameter nozzle | 0.4 mm |