FDT 533 tester For smoke switch
Tester FDT 533
TEST-F.CSEQ-FDT533
Register now and access more than 125,000 products
- Holder for test aerosol 918-5
- Can also be used for testing smoke detectors from the SecuriStar detector series
The test device consists of a test container for the test gas cylinder, a triggering lever with a sliding mechanism and an adapter for mounting on a corresponding picker rod.
The picker rods and the 918-5 test gas must be ordered separately. Caution: The P-250 test gas does not fit into the test device.
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
- Insert the test aerosol 918-5 bottle into the FDT 533 tester
- Loosen the knurled thumb screw, fold the triggering bracket handle back and insert the bottle into the test bottle holder
- On insertion, check the alignment of the nozzle
- The nozzle must be aligned so that the test aerosol can escape from the centre of the tester outlet
- Fix the bottle in the tester by tightening the knurled thumb screw
- Proceed in reverse order to remove the bottle
 | |
Area of application | Object area |
Suitable for | Smoke switch |
Suitable for number of doors | 0 - not applicable |
Mounting option | 0 - not applicable |
DIN direction | 0 - not applicable |
Type of assembly | 0 - not applicable |
Installation type | 0 - not applicable |
Material | Plastic / metal |
Colour | Black |
IP protection class | 0 - not applicable |
Suitable holding magnets | 0 - not applicable |
Locking range | 0 - not applicable |
Approval | 0 - not applicable |
Environmental Product Declaration | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!